Discuss Your Application Discuss
EN
Menu

Blade Inspection & Clearance

WIT-BR60

Wind Turbine Blade Inspection Robot

A negative-pressure crawler with multiple cameras, remote control and AI-assisted defect review for visual inspection inside wind-turbine blades.

Discuss This System View specifications
WIT-BR60 crawler inside a wind-turbine blade — product overview
Product overview · WIT-BR60

Key specifications

Technical specifications

These are translated product-document values. The operating condition below is part of the specification context.

documented internal coverage
Up to 70%*
one-cavity automatic run
70 m / ≤60 min*
primary inspection capture
3840 × 2160

Application scope

Applications

  • 01Internal blade visual inspection
  • 02Crack, wrinkle and whitening review
  • 03Structured inspection reporting

Technical review

Functions and integration

  • Negative-pressure wall adhesion with pressure monitoring
  • Multiple camera views with onboard lighting
  • AI-assisted image review, location recording and report generation
  • Human review remains part of the final reporting workflow

Product-specific evidence chain

From blade-interior capture to reviewable evidence.

The documented workflow connects crawler capture, assisted review and a location-linked report while retaining human review.

Illustrative workflow · based on supplied product documentation

  1. 01

    Capture

    Multiple illuminated camera views record accessible blade-interior surfaces.

  2. 02

    Review

    Images move through AI-assisted defect review with location recording.

  3. 03

    Retain

    Selected findings are organized into a structured report for human review.

This deterministic diagram explains the documented sequence; it is not a live software screen or independent performance validation.

Configuration review

Review your WIT-BR60 configuration

  • Blade model, entry opening, cavity geometry and known path obstructions
  • Surface condition, operating state and the planned insertion and recovery method
  • Location references, coverage statement and human-reviewed report requirements

Documented output: Selected findings are organized into a structured report for human review.

Read this output with the stated operating conditions; it is not a site-specific performance guarantee.

Confirm before ordering

Confirm the included equipment and accessories, installation and calibration responsibilities where applicable, interface documentation, required records and delivery schedule in the project quotation.

The published specifications do not define a complete supply package or a committed delivery date.

Revision-controlled source

Technical documentation

Published specifications are traced to the supplied Chinese-language source. The source file is not offered as a public download while distribution authorization remains pending.

Request controlled datasheet
Source document, revision and standardsRev A · 2026

Document record · WIT-BR60

WIT-BR60 product manual (Chinese original)

Source cross-check complete · public-download authorization pending

Standards context: DNV-ST-0376 — principles and technical requirements for wind-turbine rotor blades, including provisions for in-service inspection — the requirement an internal blade inspection is usually written against. See also IEC 61400-5:2020 — the blade part of the IEC 61400 series, which DNV states DNV-ST-0376 was aligned with. This is the published requirement the measurement serves. It is not a statement that this equipment is certified or approved to it; conformity for a project is established by the buyer's own procedure.

Source type
Supplier-supplied product manual
Revision
Revision A
Document year
2026
Issue date
Not stated
Original language
Simplified Chinese
Sections used
§2.1–2.2, §3, §5, §6 and §7.3.2–7.3.3
Source review
Source QA / distribution status
Source cross-check complete · public-download authorization pending

Evidence boundary

First-party specification; not independent validation. This first-party manual supports the stated product values and workflow; it is not independent performance validation or a guarantee for a particular blade.

Document provenance

Supplied product pack; the overview identifies the product as a negative-pressure crawler.

Documentation basisProduct evidence record
WIT-BR60
Source
Supplier-supplied product manual
Sections used
§2.1–2.2, §3, §5, §6 and §7.3.2–7.3.3
Review status
First-party specification reviewed

No field, customer or inspection-result image is published in this evidence module. The code-native record describes the source basis only.

Continue the comparison

Compare this product family

WIT-VC20

Video Blade Clearance Monitoring

Nacelle-mounted imaging and edge processing calculate blade-to-tower clearance and can transmit configured measurements to the turbine controller.

specified measurement accuracy
50 cm*
documented enclosure rating
IP65*
View specifications

WIT-RC30

Radar–Camera Blade Clearance

An 80 GHz FMCW radar and camera-fusion system for blade-to-tower clearance measurement, traceable event data and industrial-controller integration.

specified measurement range
≥130 m*
specified measurement accuracy
50 cm*
View specifications

Configure the evidence chain

Discuss WIT-BR60 against your turbine and operating conditions.

Provide the component, required output, site conditions and intended integration. We’ll identify the configuration details that need technical review.

Discuss This System Compare all systems

Technical enquiry

sales@WindInspectTech.comWhatsApp sales
At least 20 characters. Do not include passwords, credentials, export-controlled files or confidential design data.
Company and destination (optional)
Useful technical inputs (optional)

Component, operating condition, required output and preferred data interface.

Inquiry route
Use email insteadBy submitting, you confirm that you have read the Privacy Notice. Product values remain configuration-specific and require application review.